The longevity of this telescope depends on how well you maintain it. The more you know about it and the more you study it, the greater your appreciation will be for this magnificent instrument. The Vivitar telescope is a precision optical instrument. The Moon filter is screwed into the eyepiece, similar to the Sun filter. Sometimes, this filter can hinder your viewing experience, and you can obtain a sharper image without using this accessory. The moon filter will remove this unwanted glare and sharpen the image, allowing you to see the Moon’s surface in greater detail. Moon Filter: When you observe the Moon with your telescope, you will witness a lot of reflected glare, especially when trying to see the full Moon.The only downside to using this accessory is that the objects appear dim. Erecting Eyepiece: If you put the erecting eyepiece in the joint eyepiece tube and then tighten up the locking screws, the images you will see on the eyepiece will straighten out.The Sighting Scope: The sighting scope is made with a lower magnification power but a wider field of view thus, it will help you to find distant objects in the night sky with relative ease. This will enable you to experience the optimal magnification power to view distant celestial objects. Insert any of them into the joint eyepiece tube and tighten the locking screws. Eyepieces: As you know, your Vivitar telescope is shipped with two eyepieces.The final step is to install the eyepiece inside the joint eyepiece tube, and once you are done, you need to tighten up the locking screws firmly so that the eyepiece is locked into position.ĬHECK AMAZON Using The Accessories Of Your Vivitar Telesco pe Now whirl the thumb nuts back and tighten them up firmly. Take them off and loosely insert the two bolts inside the sighting scope, such that the main tube is aiming directly at them. Now locate the thumb nuts for the sighting scope and bring them out from the packaging. When you are done, tighten the left and right blocks firmly to the mount, and tighten up the handle screw of the pitching clamp. Now it’s time to loosen up the right and left blocks on the main tube and connect the main mount to the main tube. Step 5: Connecting Main Mount To Main Tube Locate the pitching shaft screw you need to use to connect the main tube to the shaft. Finally, you must tighten the wing nuts firmly to the tripod leg stands. Now you need to stretch out the tripod leg stands to put the accessory dish on it and use the short screws and wing nuts to connect the two. Then use these long screws and wing nuts to connect the mount base of the tripod to each of the leg stands. Step 2: Tripod Connectionsīring out the long screws and wing nuts from the box and lay them on the floor. Extend each of their legs to a suitable distance, from top to bottom, and then tighten the screw on the locking knob of the tripod. Remember to exercise caution as these tripod legs are very delicate. The first step you must implement is to bring out the tripod legs from your box. Assembling Your Telescope Step 1: Setting Up The Tripod Remember that light pollution makes it harder to view distant, faint objects, although it does not hamper the viewing experience of the Moon and the other planets in our solar system. Again, use the tripod for greater stability. Once you locate a site far from any light source or pollution, you can set up your Vivitar telescope and begin your night sky viewing experience. You’ll get everything you need to stargaze with this kit.Ĭonsidering the price range and other features, this one is definitely one of the best budget Vivitar telescope kits for beginners as well as intermediate stargazers. If you want our recommendation for the best Vivitar telescope, we’ll definitely recommend the 60X/120X model.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |